Crib Gogh Alpine Raptor Combat Rucksack
Crib Gogh Alpine Raptor Combat Rucksack
A light weight multi-access combat rucksack, that is at home in the mountains, desert or in the dense jungles of the world. At 38+8lts this top loader with a compartment divider and lower access via a front zip gives the user fast access to any part of the rucksack.
Designed and developed in the UK, This is the rucksack all other rucksacks aspire to be
The Alpine Raptor was developed with a spinal surgeon from the RCP (Royal College of Physicians) and complies with BS 13407-1999. All the rucksacks have a stress tolerance to exceed 100 kilos pay load. Designed to protect the spine and distribute weight correctly along the back, reducing wear and problems later in life with the lumbar region of the spine. All the bar-tacks machined-in exceed the industry standard and have set new breaking strains to the point where the rucksacks will not only allow a wounded colleague to be dragged to safety but will in fact tow a transit van. (Torque on a transit van is 3200nm, our breaking strain is 3411nm)
With two side expansion pockets and a front expansion pocket for quick access and convenient loading, your kit has never been easier to manage, and with our unique patented back system this enhances the comfort level and aids the weight distribution along the spine. Two pockets on the waist belt add to better access on the move.
All of Crib Gogh’s rucksacks are designed with the end user in mind. This one has the unique ability where it can be tailored to suit a Cadre’s requirement, or full regimental needs allowing you to add our patented chassis in part or in full. The Alpine Raptor can and will fulfil your mission specifics.
Features
Top loader with compartment divider
Zipped lower compartment access
12 Top Lash points
9 compression straps
2 Ice Axe Loops
2 Pole Loops
2 Gear loops
2 External wand pockets
10 Crampon loops (daisy chain)
Haul loop attachments
Bungee loops for a bungee mesh
Drainage
MOLLE compatible
2 Axe/Pole stays
Top carry handle (will fit ballistic gloves)
Side carry Handle (will fit ballistic gloves)
Camelbak/Source compatible to exceed 3ltr reservoir both L&R access
3 way shoulder strap adjustment (aids on the move comfort)
Strain reduction/weight distribution poly carbonate inserts machined in the shoulder straps
S shaped style shoulder straps for a comfort fit with attachments for the new combat chest rig
2 extra lash points on the shoulder straps
2 webbed accessory stays on the shoulder straps
2 Utility clips on the shoulder straps
Anti-snag attachments on all adjustment straps
Padded hip belt with bellows pockets
Patented padded spinal protection
Will take the new soldier platform combat ballistic plates and chest rig
Air-vent circulation for cooling and to wick sweat away
Will take the new soldier TE (thermo electric) cooling system
2 external bellows pockets with internal wand pockets
Front expansion pocket
Top lid pocket with rain cover
Underside lid personal organiser with lash point (Zipped)
Compatible with our patented inflatable canoe sack
All components are IRR compliant
1000d/600d fabric options
All of Crib Gogh’s products go through extensive testing and development and are then complimented with bio-mechanical tests. This is to attain the highest of standards for the ultimate professionals.
This rucksack is all tested to British Standard Kite marks, EU Kite marks and ISO requirements where available;
Colour Fastness to Light (ISO 105 B02-2000/Amendment 2:2000; use Xenon arc lamp)
Grade (B.S.) 6 Above
Tensile Strength (ISO 13934-1-1999; Instron CRE – 2” Strip)
Warp (N) 2560
Weft (N) 1731
Tensile Strength (ISO 13934-1-1999; Instron CRE – 1” Grab)
Warp (N) 2280
Weft (N) 1515
Tearing Strength (ISO 13937-1-2000; Elmendorf)
Warp yarns torn (N) >64
Weft Yarns Torn (N) >64
Water Resistance (ISO 811-1981; – Hydrostatic Head; Rate of increase of water pressure: 60 cm/min, temp of distilled water: 20 degree C) SGS Report 937428TX-G
Phosphorus testing was done to comply with FMVSS 302- Test FEDERAL MOTOR VEHICLE SAFETY STANDARD No. 302 as there are no defined standards for this test or non written for a combat requirement. Crib Gogh has set this standard as the industry bench mark.
Attachment strap This set to attain BS 5131 Pt 51.11.1981(1992) and exceeded the required set limit attaining 2209.2N for fabric rupture. SGS Report 3359393TX
All Buckles supplied and fitted: These were all tested to BS 5131 Pt 51.11.1981(1992) SGS Report 3359394
Special rot proof yarn test: ISO 2062-1993
Strength (G)
Average 3411.00
Maximum 3810.0
Minimum 3054.0 CV (%) 6.3 SGS Report 3359397TX
All Zips supplied and fitted: Tested to BS 3804-2006 and exceeded minimum requirements. SGS Report 3401078TX